201
South 31st Street
Kenilworth, NJ 07033
Phone: (908) 241- 5640
Fax: (908) 241- 5061
email: Prsm69@aol.com Home
Anodizing
|
| Colored
Stainless Steel: |
| |
The
color is produced by an electrochemical process that creates a
thin layer of chrome oxide on the stainless steel. By varying
the thickness of the oxide coating, colors ranging from Champagne,
Bronze, Blue, Gold to Black are achieved. The colors will not
crack, haze or fade from U.V. rays. The colors are primarily produced
on Mirror polished 304 grade stainless steel. Colored stainless
is custom made to order. Colored stainless steel has been used
for sculptures, elevator doors, walls and ceilings, column covers,
railings, signage, decorative trim, and medical parts.
|
| Deco-Rolled
Embossed Stainless Steel: |
| |
Deco-rolled
embossed stainless steel is manufactured in a "Z" mill
using patterned rolls to emboss one side of the stainless steel.
The standard patterns on the prime side of the stainless range
from leather grain, diamonds, linen, parquet, swirls to small
squares. The non-prime side of the stainless is flat and is excellent
for laminating to substrates due to the 100% surface contact.
The Deco-rolled stainless steel is in stock at our Kenilworth,
NJ facility. The sheet sizes are 49.2" X 98.4" in 22
& 18 Ga. The Deco-rolled stainless steel sheets are being
used on projects all over the world for exterior wall cladding,
roofing, column covers, doors, signage, bridge cladding, commercial
and residential kitchens, buses, trains, and airplane food handling
equipment, just to name a few. The Deco stainless is a low maintenance
product and works well in high traffic areas like airport terminals
as well as bus stations.
|
| Pre-Vandalized
Stainless Steel: |
| |
Pre-Vandalized
stainless steel is manufactured using a random orbital grinder
and is the ultimate weapon against graffiti. The random pattern
provides a surface that hides scratches and can be refinished
in the field. The Pre-Vandalized sheets come in natural stainless
steel and black colored stainless steel which can be re-vandalized
after coloring.
|
| Ti-Gold
Stainless Steel: |
| |
Prismatic
is now stocking and distributing Ti-Gold stainless steel in the
United States. The Ti-Gold is manufactured using a super mirror
polish which is then placed in a vacuum chamber, where a solid
piece of titanium is vaporized by means of an electrical arc.
The resulting titanium ions form a plasma that is mixed with nitrogen.
The positively charged plasma is attracted to the negatively charged
sheet. The titanium film grows uniformly over the entire sheet
with a thickness of .002". The Ti-Gold looks similar to brass
but does not have to be lacquered. The Ti-Gold process can be
used on sheet or railings and can be seen on large Casino projects
in the United States. |
| |
| New Wave Finish: |
| |
 
 
|
| |
|
|
